Datenträger - Festplatten, SSDs, Speichersticks und -Karten, CD/ 19.539 Themen, 109.435 Beiträge

Die Sache mit dem Datendurchsatz.

SmallAl / 0 Antworten / Flachansicht Nickles

Ich habe eine neue Festplatte installiert (Maxtor DiamondMax VL20 20,4).
Als ich dann mal mit Dr.Hardware mir den Datendurchsatz anschaute habe ich einen Schreck bekommen !
Ich habe ein Gigabyte GA 586 TX3 Motherboard mit AWARD BIOS v4.51PGM (07/20/98)
AMD K6(tm)3 3D-now! Prozessor (@ 6*66Mhz = 400.8)
Auf der HP von Maxtor habe ich dann folgende Info gelesen :
Subject: Using the UDMAUPDT.EXE Utility
Summary: To describe potential symptoms that may arise when using UDMA/66 DiamondMax 6800 (and newer)
hard drives on older UDMA/33 Motherboards with an older, Award BIOS.
Overview: Some older Ultra DMA 33 motherboards that use the Award (revision date 10/28/98 and older) BIOS have exhibited
compatibility issues with Maxtor DiamondMax 6800 (5,400 RPM), Ultra DMA/66 drives. This symptom has been identified on
motherboards (using the Award BIOS) using (but NOT limited to) the following Chipsets:
Intel: 430TX, 440LX, 440BX.
VIA: 586A, 586B, 596, 686.
SiS: 5598, 5591, 5600, 530, 620.
ALi: 1543C, 1533A-J, 1543A1-F.
The symptom manifests itself as a system hang at boot. On some motherboards that use older versions of the Award BIOS, the system
does not properly check the UDMA setting returned by the drive. This results in the motherboard attempting to set itself up in Ultra DMA
mode 4 - a mode that it does not support. These issues arise because of a bug in the system's BIOS, NOT a problem with the Maxtor
hard drive. Award is aware of this problem and is working on a fix.
To eliminate this problem, Maxtor has developed the UDMAUPDT.EXE utility. This program is designed to change (update) the UDMA
Mode that the drive reports to ANY UDMA Mode (0-4). This file can be downloaded from Maxtor’s Website at:
http://www.maxtor.com/library/main.html
kurzerhand die Datei downgeloaded und prompt mein Bios korrigiert, Ergebnis s.u..
Festplatten :
0 = Seagate Medalist 4310
1 = Quantum Fireball
2 = Maxtor DiamondMax VL20 udma mode 4 (wird gar nicht vom Board unterstützt)
3 = Maxtor DiamondMax VL20 Udma mode 2 (=Udma 33 - nach Korrektur mittel Programm "umdaupdt.exe" von der www.Maxtor.com Homepage downgeloaded)
Dr.Hardware für Windows 3.01d
HD - Lesezugriff (ms) - Datendurchsatz
- min - Spurz - mittel - maximal - 10k-Blöcke - 64k-Blöcke
0 - 6.0 - 9.8 - 16.2 - 42.0 - 4182.1 - 19469.4
1 - 4.0 - 11.0 - 13.5 - 23.0 - 2186.7 - 4207.8
2 - 4.0 - 8.0 - 10.7 - 19.0 - 950.5 - 5294.3 (=vorher)
3 - 4.0 - 8.0 - 11.1 - 18.0 - 1802.6 - 10059.2 (=nachher)
Dieses kleine BIOS-Update Programm hat also einen Performance-Gewinn von fast 100% gebracht !
Beim Suchen hatte ich dann noch etwas gefunden, was ich hier an den Mann bringen möchte.
Bei ct gibt's ein kleines Programm, was all die jenigen freuen dürfte die einen AMD K6(tm) 2 oder 3 haben.
ftp://ftp.heise.de/pub/ct/ctsi/setk6v3.zip
Auszug aus der Liesmich.txt:
"AMD K6, K6/2, K6/2CXT, K6-III-Utility SetK6, c't,
Andreas Stiller im März 99
**********************************************************************
SetK6V3.exe 32-Bit-Version für Win95/98 und Win NT
SetK6V3D.exe DOS-Version
Direct95.VXD Treiber fÜr Win95/98
DirectNT.SYS Treiber für NT
SetK6 kontrolliert und setzt die internen Prozessorregister für
Write Allokation und Write Combining (nur K6/2CXT und K6-III).
Falls das BIOS den Prozessor nicht kennt und nicht korrekt initialisiert,
läuft der Prozessor im Schnitt etwa fünf Prozent langsamer als nötig.
..."
prompt downgeloaded und ausgeführt, der Effect läßt sich wieder mal sehen:
Dr.Hardware für Windows 3.01d
Leistung des Systems [wert vorher - Veränderung in %]
Mem-32 (MB/s)
Füllen : 143.8 [63.8 - +125%]
Kopieren : 96.0 [53.8 - + 78%]
Verschieben: 102.1 [60.0 - + 70%]
Insgesamt : 114.0 [59.2 - + 93%]
Mem-16 (MB/s) und Indexe
RAM-DTR max. : 619.3 [560.3 - +11%]
RAM-DTR min. : 331.8 [309.7 - + 7%]
Winhardstones: 297732 [282231 - +5%]
Winsoftstones: 194870 [193440 - +1%]
Pentium-100 Rate
Integerrechnun

remember: Today is the first day of the rest of your life !
bei Antwort benachrichtigen